LAZYrider
 
 
 
LAZYrider's stats
 
  • Review count
    5
  • Helpfulness votes
    3
  • First review
    July 31, 2011
  • Last review
    October 14, 2012
  • Featured reviews
    0
  • Average rating
    4.8
 
Reviews comments
  • Review comment count
    0
  • Helpfulness votes
    0
  • First review comment
    None
  • Last review comment
    None
  • Featured review comments
    0
 
 
LAZYrider's Reviews
 
 REV'IT! Monster Gloves
REV'IT! Monster Gloves
REV'IT! Monster Gloves The perfect blend of style and function this short, fully perforated leather summer glove incorporates a variety of protective features. Made from supple yet durable goatskin, the MONSTER features PU injected protective panels on the fingers as well as a leather wrapped composite knuckle. Additional Temperfoam padding on the palm provides adequate impact protection while silicon painted Clarino patches on the fingers provide extra grip for the precision feel that every rider demands. PROTECTION FEATURES Outershell goatskin, Clarino Insulation tri-fleece lining Protection carbon hard shell knuckle, Temperfoam padding at thepalm ERGONOMIC FEATURES Fit pre-shaped ergonomic fit Adjustability draw flap on cuff Features stretch lips at the fingers, short cuff
 
Overall rating 
4 / 5
4 / 5
Excellent fitting
PostedOctober 14, 2012
Customer avatar
LAZYrider
From Los Angeles
State:CA
Rider Type:Commuter
Age:45-54
Gender:male
Bang for the Buck 
4 / 5
4 / 5
Style 
5 / 5
5 / 5
Comfort 
4 / 5
4 / 5
Protection & Durability 
4 / 5
4 / 5
Air Flow 
5 / 5
5 / 5
Features 
4 / 5
4 / 5
I have this pair of glove for over a year now (used only for summer). It still in good shape. The glove snug fit and mold to my hand perfectly. The air flow was excellent to keep my hands cool in summer so this is the reason why I can't wear this in winter!!
Rides: 2010 Honda VFR1200
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
 Gerbing's Hybrid Heated Gloves
Gerbing's Hybrid Heated Gloves
Gerbing's Hybrid Heated Gloves The new line of 12V Hybrid Products utilize Gerbing's Hybrid Heating System. This system allows you the option of powering from your vehicle's 12V electrical system, or from Gerbing's 12 volt lithium-ion battery pack with its built-in microprocessor temp controller. FEATURES Made with premium, supple, drum-dyed leather Soft tricot fleece lining with 100g of Thinsulate lining Incorporates Gerbing's Microwire heating technology that uses micro-sized heating fibers to surround the hand with warmth Internal Aquatex waterproof/breathable membrane (though the leather exterior is not waterproof and should be treated with Nikwax Glove Proof ) Includes vehicle battery harness and Y-harness Two 12 V batteries and a charger are optional (sold separately) SPECIFICATIONS Approximate battery capacity per charge for 12 V hybrid glove batteries Power Level Run Time High 1 hour Medium 2.5 hours Low 4 hours Vehicle Battery unlimited ACTUAL RUN TIME FOR THE GERBING's HYBRID HEATED GLOVES MAY VARY DEPENDING ON AMBIENT TEMPERATURE. BATTERY CAPACITY DECREASES IN VERY COLD WEATHER, ESPECIALLY IF THE BATTERY IS NOT INSULATED, AND IS LEFT EXPOSED TO THE ELEMENTS. AT LESS THAN 32 DEGREES FAHRENHEIT A BATTERY MAY ONLY PRODUCE 80 OF ITS CAPACITY.
 
Overall rating 
5 / 5
5 / 5
Surely keep your hands toasted!!!
PostedOctober 14, 2012
Customer avatar
LAZYrider
From Los Angeles
State:CA
Rider Type:Commuter
Age:45-54
Gender:male
Bang for the Buck 
3 / 5
3 / 5
Style 
4 / 5
4 / 5
Comfort 
5 / 5
5 / 5
Protection & Durability 
4 / 5
4 / 5
Air Flow 
4 / 5
4 / 5
Features 
5 / 5
5 / 5
Fit
Small
Slightly Large
Large
I have used this glove over winter 2011. The first time I used them without the heat controller hooked up directly to bike battery at first was ok when engine not running so next morning I went riding with 45-50F outside and my hand got toasted (not toasty). Yes, I got burnt!!! So I bought the controller and they work great. I also ordered a battery packs to use it so I don't have wires hanging around and they work just find round trip of my commute to and from work about 2 hours setting at medium heat before the batteries depleted. I used the gloves in heavy rain and it's kept your hand dry but I found that if your suit long sleeve will not go over the glove then the water sometime leaked into the glove from the back. Over all I would recommended these gloves but they are expensive. I spend about $350 altogether!
Rides: 2010 Honda VFR1200
Yes, I recommend this product.
+1point
1of 1voted this as helpful.
 
 Gerbing Two 12V Hybrid Glove Batteries + Charger Kit
Gerbing Two 12V Hybrid Glove Batteries + Charger Kit
Gerbing Two 12V Hybrid Glove Batteries + Charger Kit The 1.2Ah Lithium micro-processor controlled rechargeable battery pack can be used with Gerbing Heated Hybrid G3 and T5 Motorcycle Gloves and Heated Insoles when off the bike. The batteries have three heat settings, allowing them to be used without a temperature controller. Includes two Gerbing 12V Lithium Batteries and one charger. Features 12V 1.2AH One battery for each glove
 
Overall rating 
5 / 5
5 / 5
Surely keep your hands toasted!!!
PostedOctober 14, 2012
Customer avatar
LAZYrider
From Los Angeles
State:CA
Rider Type:Commuter
Age:45-54
Gender:male
Bang for the Buck 
3 / 5
3 / 5
Style 
3 / 5
3 / 5
Comfort 
5 / 5
5 / 5
Protection & Durability 
4 / 5
4 / 5
Air Flow 
4 / 5
4 / 5
Features 
5 / 5
5 / 5
Fit
Small
Slightly Large
Large
I have used this glove over winter 2011. The first time I used them without the heat controller hooked up directly to bike battery at first was ok when engine not running so next morning I went riding with 45-50F outside and my hand got toasted (not toasty). Yes, I got burnt!!! So I bought the controller and they work great. I also ordered a battery packs to use it so I don't have wires hanging around and they work just find round trip of my commute to and from work about 2 hours setting at medium heat before the batteries depleted. I used the gloves in heavy rain and it's kept your hand dry but I found that if your suit long sleeve will not go over the glove then the water sometime leaked into the glove from the back. Over all I would recommended these gloves but they are expensive. I spend about $350 altogether!
Rides: 2010 Honda VFR1200
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
 Alpinestars Bionic 2 Protection Jacket
Alpinestars Bionic 2 Protection Jacket
CE certified GP elbow and shoulder protectors Technical stretch net construction Removable Tech Race back guard Chest guard Stretch Cordura reinforcement on the back Zipper closure Adjustable arms and shoulders
 
Overall rating 
5 / 5
5 / 5
Excellent Air Flow to keep you cool on a hot day!
PostedSeptember 4, 2012
Customer avatar
LAZYrider
From Los Angeles
State:CA
Rider Type:Commuter
Age:45-54
Gender:male
Bang for the Buck 
4 / 5
4 / 5
Style 
5 / 5
5 / 5
Comfort 
5 / 5
5 / 5
Protection & Durability 
5 / 5
5 / 5
Air Flow 
5 / 5
5 / 5
Features 
4 / 5
4 / 5
Fit
Small
Slightly Small
Large
I ride my motorcycle for commute to and from work daily. I have three different suit. one for winter, one for raining season, and this one is for hot summer weather. This jacket will keep you cool. I ordered x-large and fit perfectly. I'm 5' 10" 219 lbs. Medium build. I am really happy with it.
Rides: 2010 Honda VFR1200
Yes, I recommend this product.
+2points
2of 2voted this as helpful.
 
 Shoei RF-1100 Helmet - Solid (2XL Only)
Shoei RF-1100 Helmet - Solid (2XL Only)
Shoei RF-1100 Helmet - Solid Colors SHOEI is proud to introduce the all-new RF-1100 Helmet, which is built on the strongest pedigree in the motorcycle helmet business. The Shoei RF-1000 has enjoyed great success since its 2003 inception, but that didnt stop SHOEIs world-class development team from throwing out the molds to build a brand-new helmet from scratch. Combining dealer and customer requests with advanced technology, modern testing practices, and fifty years of helmet-building experience, SHOEI delivers the finest sport-touring helmet that money can buy. The all-new, groundbreaking Shoei RF-1100 - where aggressive styling meets SHOEIs unrivaled attention to detail, and the evolution of perfection is once again met. AIM+ Shell Construction Aerodynamic properties are maximized through extensive wind tunnel and professional riders feedback High performance fiber materials are combined with extremely elastic organic fibers to create shell structure that is ultra lightweight, rigid and resilient 5 Shell Sizes and six EPS liner configurations present increased fit options that comfortably fit most head sizes A third generation Tail Fin, integrated into the bottom rear beading in combination with the Shell-Integrated Spoiler, allows smooth airflow that reduces drag and lift CW-1 Face Shield The CW-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Q.R.S.A. (Quick Release Self-Adjusting) Base Plate System Q.R.S.A. base plate allows for tool-less face shield removal and installation. Every time the shield is lowered, the spring-loaded base plate (U.S. patent pending 11/799935) pulls the shield back to contact the window beading evenly, ensuring a wind and waterproof seal between shield and helmet Variable Ventilation System Upper Air Intake Vent is positioned to maximize air volume into the helmet interior Top outlet vent is separate from the Shell- Integrated Spoiler, allowing it to be positioned for optimum flow-through ventilation Four rear outlet vents allow for adjustment of airflow based on riding position Enlarged lower air intake/defroster vent reduces shield fogging and increases ventilation The rear/neck outlets allow for effective air exhaust Breath guard and chin curtain included Interior System The entire interior lining (cheek pads, crown liner and chin strap covers) is easily removed to allow cleaning Each component of the inner liner is ergonomically designed to offer the ultimate in safety, fit and comfort Eyeglass compatible Tech Specs 5 shell sizes Weight 3.54 Pounds / 1604grams (based on size medium / solid color) DOT and Snell M2010 approved Need help with sizing Check out our sizing video or read our Shoei Size Chart for more help. And don't forget our Gear Geeks are always available to help you out if you need advice. setTimeout(function()var adocument.createElement(script) var bdocument.getElementsByTagName('script')[0] a.srcdocument.location.protocol+//dnn506yrbagrg.cloudfront.net/pages/scripts/0010/2527.js a.asynctruea.typetext/javascriptb.parentNode.insertBefore(a,b), 1) Note Due to manufacturer restrictions, the Shoei RF-1100 and other Shoei products can only be shipped to addresses within the United States
 
Overall rating 
5 / 5
5 / 5
I love it!
PostedJuly 31, 2011
Customer avatar
LAZYrider
From Los Angeles
State:CA
Rider Type:Commuter
Age:45-54
Gender:male
Bang for the Buck 
3 / 5
3 / 5
Style 
5 / 5
5 / 5
Comfort 
5 / 5
5 / 5
Protection & Durability 
5 / 5
5 / 5
Air Flow 
5 / 5
5 / 5
Features 
5 / 5
5 / 5
Fit
Small
True to Size
Large
Noise Level
Quiet
Quiet
Loud
Weight
Light
Average
Heavy
Shape
Narrow
Round Oval
Round
Vision
Narrow
Average
Wide
When I was shopping for my first helmet. I was worrying about the helmet fitting but with all the video clips from revzilla have helped me to choose the right one for my first helmet. The RF1100 fit me perfectly. I like the style and the way it look. The vent kept me cool but when I stop at the traffic light the heat build up quickly when outside temp was about 90F. I ordered a tinted gold color face shield to replace the original clear face shield. I found it very easy to replace. Overall I love this helmet!
Rides: 2010 Honda VFR1200
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
LAZYrider's Review Comments
 
LAZYrider has not submitted comments on any reviews.