Designed for the street without giving up the benefits of a racing helmet. Completely new helmet based on Corsair V shell Same wider eyeport opening as Corsair V Same face shield as the Corsair V Intermediate Oval Fit (same head shape as Quantum 2) Slightly different feel due to new cheek pads. New cheek pads come down further and cradle the head better. Made of a different density material which results in an extremely comfortable and quiet helmet Advanced ventilation Smaller, More Aerodynamic shell shape Hyper-Ridge circles lower shell to improve strength and aerodynamics Retractable chin spoiler Emergency Cheek Pad Removal system along with removable neck roll One piece bottom edge trim Race helmet for the street 5 unique size shells (XS, S, M/L, XL, XXL). Meets or exceeds SNELL 2010 and DOT specifications 2010 Model
The RX-Q is an awesome helmet. It is very stable at speed both when looking straight and checking over the shoulder. It is also very comfortable and feels very light, like the center of gravity of the helmet is positioned low. There is plenty of ventilation and the noise level is reasonable.
Dainese Hard Shorts Features Perforated plates in Astronmemory and polypropylene sandwich on the thigh Polypropylene and polyethylene sandwich plate on the coccyx Soft protectors certified to Standard EN 1621.1/97 at sides Coarse mesh elasticated trousers Elasticated inserts in silicone rubber on the thighs Perforated plates Soft inserts on the sides and buttocks. PCT Patent Pending
These shorts are pretty comfortable and seem to provide a reasonable level of extra protection. I wear them underneath more casual type riding pants. The elastic bands around the waist and legs are grippy and hold the shorts in place nicely. Make sure you get the right size (snug) so the armor stays in place when you move around.
Alpinestars Logic Denim Kevlar Jeans The classic style of the Logic Kevlar Denim Pants offers exceptional comfort both on and off the bike and incorporates internal Kevlar reinforcements for enhanced abrasion protection in key impact areas. Developed to offer substantial protection over traditional denim jeans, these pants are constructed of comfortable abrasion and tear resistant cotton denim with strong main seam construction and internal Kevlar reinforcements in the knees and seat. Traditional 5 pocket design with two rear pockets, two hand pockets and a front coin pocket. Slightly articulated knee for superior fit in the riding position Please Note The waist of the Logic Denim Pants runs small, we recommend ordering a size up from your normal pant size.
These pants do not seem very protective. The kevlar panels are very thin. They are a nice pair of jeans but I wouldn't trust my knees/legs to them in a crash. I would recommend wearing stand-alone knee guards if you ride in these.
Arai SAI Face Shield Arais SAI shield is the latest generation of Super AdSis shield system, designed for the 10mm wider eye port Arai SAI face shield fits Arai Corsair V , Vector 2 , RX-Q and Arai Signet-Q Helmets Please Note Will not fit Vector helmets - Vector helmets use the SAQ Faceshield .
Protection Autonomous knee protector with support straps Homologation Knee and shin EN 1621-1 Comes in pairs Patent Chest and neck protector (Community Designs n 000528153) Biomechanical protector (PCT Patent Peding)
These knee guards are super comfortable and protective. They have three straps so they stay in place and the knee cup is deep and wraps around the knee. The shin plate is long so you will need to tuck them in to the tops of your boots. I highly recommend these.
Aimed at the Supermoto/Naked bike user, the S1 glove offers urban riders the best of both worlds extended cuffs offer addition protection around the wrist, whilst maintaining the flexibility and freedom of movement provided by a MX glove. Features Polyurethane knuckle protection which is complemented by three Polyurethane ridges position on the first three fingers, providing the ultimate in abrasion resistance External foam padding is provided around the wrist, thumb and over the fingers for additional impact absorption An accordion stretch panel on the thumb allows for an excellent range of motion whilst providing an extra layer of padding over the thumb joint Pre-curved fingers assist with grip while reducing muscle fatigue Featuring a MX style wrist closure system for ease of use, minimum detailing and the ultimate in urban styling External seam stitching has been used to improved feel and comfort
These gloves are very comfortable and seem reasonably protective. The 3/4 length provides more coverage than a short cuff but less than a full gauntlet. I would recommend these gloves for street riding.
These are a great pair of pants for street riding. I would highly recommend them if you are looking for a pair of leather pants without knee sliders. They have excellent knee/shin protection and are pretty comfortable considering the level of protection. The waist zips to my Dainese jacket with no problem.
I am 5'-10" 140 lbs, size 30 waist, size 31 jeans. The size 46 in these pants fits great.
Dainese Leather Protection Cleaning Kit This kit contains two products the first provides the leather with a deep cleaning the second provides nourishment to keep the leather soft and rich. Please Note This kit is for standard leather ONLY . For vintage leather use the Dainese Vintage Leather Cleaning Kit.
Dainese Steel Core Carbon Gloves Continuous innovation and experience on racetracks around the world have lead to the development of this racing glove. Excellent ergonomics are matched with equivalent safety levels against abrasion and tearing thanks to the Kevlar jersey, construction with single panel of leather for the protector of the stitching on the little finger side of hand, and the reinforced palm. Protection against shock is provided thanks to the new steel inserts faced with extraordinarily stiff carbon, little finger construction reinforced with internal inserts and Distortion Control, inserts on the knuckles, the back of the hand, the palm, and head of the ulna. Composite inserts in stainless steel faced with carbon fiber on the knuckles and the back of the hand Inserts in thermoplastic resin on the knuckles and the back of the hand Polyethylene inserts at the base of the fingers Inserts in thermoplastic polyurethane on the outside of the little finger, the top of the ulna bone and the palm Distortion control on the little finger Kevlar-jersey (brand-name fiber) Cowhide leather Stone PU Spandex fabric Reinforced palm One single leather panel to the size of the hand Tightening strap Adjustable cuff strap Inserts in elasticated fabric Elasticated inserts Pre-curved fingers Perforated cuff Perforation on the inner side of finger Soft inserts
These gloves are awesome. They feel very protective with plenty of reinforcement in critical areas but they are still very comfortable and have excellent feel when operating the controls. A note on sizing - I wore a Medium in Alpinestars but I wear a Small in these.
Alpinestars S-MX 5 Boot The S-MX 5 has been created as a performance road and track boot, incorporating the latest technical footwear design and material know-how. Following on from the other performance boots in the Alpinestars range, the S-MX 5 is notable for its comfort, hugging fit, safety performance and ease of adjustability. Features Durable, high-tech micro-fiber upper construction offering a high level of flexibility Double injected PU shields the shin, ankle, calf, toe and heel from impact while minimizing abrasion Inner protection is given by a double injected panel connected to the heel counter, hidden beneath the outer shell and running up the outer ankle Quick drying polyamide lining is laminated with open cell foam and high density contoured padding to absorb shocks to the foot area The S-MX 5 boot is CE certified Innovative air vents at the ankle, heel and forefoot are covered with a specially designed mesh to provide unmatched levels of rider comfort Large throat profile instep and Achilles flex bellows for superior flex and comfort MTP mesh liner and anatomical, removable, PU Foam foot bed keeps the foot cool and comfortable A fully vented version is also available in Black Innovative inner (medial) side entry opening/closure system that features an elastic mounted zipper with an extra wide Velcro flap, to give a precise, comfortable fit and wide opening aperture for ease of access Highly ergonomic, lasting for ultra precise fit Exclusive compound rubber sole features structured shank reinforcement for added support to the arch area Interchangeable bi-injected PU toe slider with snap-in assembly
These boots are very comfortable and feel protective. They feel supportive but do not force your ankles into a super aggressive riding position. The materials and construction seem to be of high quality. I have no problems tucking the bottoms of my knee/shin guards into the tops of the boots. Overall, these seem like excellent boots for everyday street use. I followed the sizing guidelines provided by Revzilla and the size 44 fits my size 10 foot well.
Alpinestars Bio Armor Back Protector Features Direct replacement for Alpinestars RC Back Protector which has been discontinued Optimized for insertion into the latest Alpinestars technical jackets. Slimline profile. Conformable impact absorbing compound mold easily to the body. Perforated to improve the breathability. CE certified level 1 to latest prEN1621-22010. Please see below chart for protector measurements Size Measurements Small 14.5 Height 9.75 Widest Point 6.5 Narrowest Point Medium 16.25 Height 9.5 Widest Point 6.75 Narrowest Point Large 18.5 Height 10 Widest Point 6.75 Narrowest Point (function() var cycle true ('table.sizechart tbody tr').each(function(row) classname (cycle !cycle) 'light' 'dark' row.addClassName(classname) ) )()