Givi TN355 Engine Guards Super Tenere XT1200Z 11 Designed for the on and off road enthusiast the GIVI engine guards give a more rugged and aggressive look as well as offering better overall protection for those unforeseen mishaps. Made from one inch tubing and available in matte black the GIVI engine guards are a great addition for the serious motorcycle enthusiast.
This is the first product I have ever purchased from GIVI. The price was too attractive compared to other engine guards I decided to give it a try.
Installation was pretty simple but I would recommended not following the order given in the instructions. Install the brackets to the engine mount in the front first. leave everything loose then install the guards....it makes it a lot easier to assemble the bracket on the front first then install it on the bike as well. If you follow that order it is a snap to put on. The guard itself seem pretty sturdy, Only time will tell I hope I never have to test these for strength.
If you ride serious off road you may want to look into something more substantial but for touring and light off pavement...these should do the trick.
Sena SR10 Bluetooth Two-Way Radio Adapter The SR10 is a Class 1 Bluetooth Two-way Radio adapter based on Bluetooth 2.1+EDR technology. You can connect various two-way radio devices in the market by using SR10 and may talk wirelessly using Bluetooth headsets The Sena SR10 bluetooth two-way radio hub has two AUX ports that enable you to connect non-Bluetooth devices such as radar detector or GPS navigation. Along with the Sena SR10 bluetooth audio gateway, you can talk by phone or by two-way radios at the same time, listen to an alarm signal from radar detector and listen to the guides from GPS Navigation. Features Bluetooth hands-free adaptor for two-way radios Bluetooth hands-free gateway hub for mobile phones Connect 1 two-way radio and 1 mobile phone simultaneously Compatible with standard stereo or mono Bluetooth headsets AUX input for GPS, radar or laser detectors Handlebar mounting belt clamping Wired PTT button extension for handlebar grip mounting Firmware upgradeable Two-year limited warranty Specifications 3.5mm Jack port x 2 GPS Navigation RADAR detector Cellular phone (AUX2 only) mini DIN port x 1 2-way radios (Kenwood, Midland, Motorola, I-com, YAESU) 2.5mm Jack port x 1 for wired PTT button Charging time 3.5 hours Type Lithium polymer battery Talk time 12 hours Standby time 10 days Dimensions 108 mm x 52 mm x 29 mm (4.3 in x 2.0 in x 1.1 in) Weight 81g (2.86 oz) Package Contents SR10 Bluetooth Adapter USB Power Cable 12v car charger 3.5 Stereo Audio Cable Wired PTT (Push to Talk) Button Mounting Kit Clip Kit Please Note No longer includes DC wall power charger and 2-way radio and connecting cables are sold separately.
I needed something so I could listen to my non bluetooth GPS in my helmet. I also needed to connect a two-way radio to my helmet as well. The Sena SR10 fit the bill perfectly. The sound is clear and works well for both applications.
The battery lasts a long time and the unit is very easy to setup and use. You can tell some thought went into producing it. Its very well made....
I use the SR10 in conjunction with the Sena SMH10 and as expected they work flawlessly together.
Sena SMH-10 Bluetooth Headset The SMH10 is a Bluetooth v3.0+EDR Class 1 Stereo Headset with long-range Bluetooth Intercom designed specifically for motorcycles. With the SMH10, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. Thanks to the latest Bluetooth v3.0+EDR and the advanced digital processing technology, the Sena SMH10 bluetooth 3.0 offers the best sound quality for both incoming and outgoing sound in its class. Also, the easy-to-access and intuitive button operations make the SMH10 a perfect companion for motorcycles. Features Audio Booster Individual Volume Control Versatile Jog Dial Use while charging Upgradable firmware General Talk time 12 hours Standby time 10 days Working Distance (Intercom) up to 900 meters (980 yards) in open terrain 4-way conference intercom Dimensions Headset 84.1 mm x 56.5 mm x 38.6 mm (3.3 in x 2.2 in x 1.5 in) Clamp unit 223.8 mm x 85.5 mm x 30.6mm (8.8 in x 3.4 in x 1.2 in) Headset weight 60g (2.11 oz) Clamp unit 84g (2.96 oz) Bluetooth Profiles Headset Profile, Hand-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP) Bluetooth v3.0+EDR Audio Built-in SBC Codec Voice prompts Conference phone call with intercom participant Noise cancellation Wind noise reduction Wide volume control Sample rate 48kHz (DAC) Auxiliary audio-in connection via 3.5mm jack Battery Charging time 2.5 hours Type Lithium polymer battery Please Note Some of the above features require updating the firmware to the latest v4.1. The firmware is a free download from Sena Technologies .
This is my third bluetooth headset I have owned. The first was a Blue Ant F4...a good unit but I had to replace the speaks twice do to a bad design where the plug into the receiver. The second was Blinc....just bad all around...
Based on good reviews and price point I decided to give the Sena a try. I have been very happy. Very easy to use. On and off is quick and easy. Volume control is the best so far with a simple turn of the nob....no pushing buttons to raise or lower the volume. Sound is clear and as good as the F4 and FAR better than the Blinc. Speaker placement in the helmet is key for good sound and volume. Pairing is also very straight forward. I like the voice prompts when its connected to a device or turning it on or off....even battery level can be heard when You want to. all very handy when you are wearing your helmet. The main unit is easily removed and installed from the helmet for charging and in my case switching helmets. I bough a second speaker and microphone setup and I can swap the unit over very quickly.
I also am using the Sena SR10 to stream audio from CB radio and my GPS. As expected it works flawlessly with the SMH10.
Waterproof/breathable using Hipora membrane Cordura 330D back of hand for durability Clarino palm and patch over foam pad for reduced vibration Thinsulate 40 gram insulation for warmth Neoprene cuff to lock out cold air Adjustable wrist strap for a custom fit Molded knuckle protection Reflective piping for night visibility Box-construction with tapered finger for a comfortable fit 2-year limited warranty
Overall I like these gloves they are comfortable not to hot and look good. The worst part is they claim they are waterproof but they are not. Riding in the rain for any length of time and your hands are soaked. You can ring the water out of them. I don't think I would buy these again since one of the main selling points was the waterproof aspect.
I have purchased a few Firstgear products and haven't been thrilled with the quality control. For the price I expected a little better.
AFX FX-39 Dual Sport Hi-Viz Helmet Features A large-size FX-39DS weighs 1.59 kg or 3.5 lb An aerodynamic shell design constructed using an advanced lightweight composite poly-alloy A flip-up, flush-fit, quick-release, single-turn screw face shield with side covers. The shield itself is optically correct, compound-curved, scratch-resistant and protects against UV-rays There are several tinted shields available for this model Shield can be removed to allow open face riding or goggle use A helmet liner and cheek pads made with a hypoallergenic and anti-microbial nylon, all of which are removable and washable 9 points of ventilation with chin, side, forehead, top and rear vents Retention system is quick release Provides ample ear cavity space for speakers A clear coat finish to protect paint and graphics Comes with a Limited Lifetime Warranty Includes flat black side-covers and screw plug for shield use without the visor DOT approved for use in the United States
For the price point this helmet is a good deal. I found them to size smaller than other helmets. I routinely take a large but the size guide said I should fit squarely in a medium. So I ordered the medium. Well it was very tight in fact my nose hit the front of the helmet. Luckily Revzilla's excellent CS exchanged the helmet without issue. The large fits much better. My guess is the shell size must change between Med and large. Over all its comfortable once you have it on a while and the pads break in. I like the ratchet chin strap. Cons are its a PIA to take the shield off and clean it....top vents are hard to find while riding...that may get easier with use. Overall I'm happy with it considering the price. You NOT getting Arai XD4 so don't expect that.