twwhitak
 
 
 
twwhitak's stats
 
  • Review count
    5
  • Helpfulness votes
    0
  • First review
    April 25, 2011
  • Last review
    June 24, 2013
  • Featured reviews
    0
  • Average rating
    4.4
 
Reviews comments
  • Review comment count
    0
  • Helpfulness votes
    0
  • First review comment
    None
  • Last review comment
    None
  • Featured review comments
    0
 
 
twwhitak's Reviews
 
AltRider Yamaha Super Tenere XT1200Z Side Stand Foot Install theAltRider Side Stand Foot for the Yamaha Super Tenere to keep it from sinking or falling on soft surfaces. Made from 1/8 inch stainless steel, this foot features 3D tread to create traction for your boots. The tread means you can easily deploy the side stand while still on the bike. After months of use, the AltRider side stand foot will remain tight because it clamps down on the actual foot of the side stand with Torx fasteners. No more rattling or stripped fasteners. Specifications Made from 1/8 inch stainless steel Torx fasteners (requires T-25 Torx driver) Includes Loctite (except on international orders) Height 1 inch Width 4 inches Depth 4 inches Weight 0.5 lbs
 
Overall rating 
4 / 5
4 / 5
Works as advertised.
PostedJune 24, 2013
Customer avatar
twwhitak
From Soddy Daisy
State:TN
Rider Type:Adventurer
Age:55-64
Gender:male
Bang for the Buck 
3 / 5
3 / 5
Ease of Install 
5 / 5
5 / 5
Performance 
5 / 5
5 / 5
Finish 
5 / 5
5 / 5
Durability 
5 / 5
5 / 5
The foot extender really helps out when parking a top heavy bike like the S10 on questionable ground. The quality is excellent and it is a 5 minute install. It is a little pricey.
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
Synthetic PU and mesh fabric combination upper construction. Synthetic PU and suede palm main construction with Clarino reinforcements. Carbon fiber knuckle protectors. TPR protectors on fingers and top of the hand. Wrist foam padding insert. Thumb foam padding inserts. Pre-curved finger construction to reduce riding fatigue. Silicone print on first two fingertips for improved lever grip. Synthetic PU and suede over-wrapped fingertip construction for durability. Stretch relief on the thumb for ease of flex. TPR wrist flap closure with non aggressive microvelcro and puller flap for easy entry. TPR over spoiler with split top panel construction. Sonic welded TPR Astar logos. Picture of the White-Black glove is a preproduction version and is different from the actual product. The area around the knuckle protector is all black instead of white. Please refer to the video.
 
Overall rating 
4 / 5
4 / 5
Good solid warm weather glove
PostedJuly 9, 2012
Customer avatar
twwhitak
State:TN
Bang for the Buck 
4 / 5
4 / 5
Style 
4 / 5
4 / 5
Comfort 
4 / 5
4 / 5
Protection & Durability 
4 / 5
4 / 5
Air Flow 
3 / 5
3 / 5
Features 
4 / 5
4 / 5
Fit
Small
Slightly Small
Large
Nice quality protective glove with good but not great ventilation. They do run one full size small.
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
Sena SMH-10 Bluetooth Headset The SMH10 is a Bluetooth v3.0+EDR Class 1 Stereo Headset with long-range Bluetooth Intercom designed specifically for motorcycles. With the SMH10, you can call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigations by Bluetooth wirelessly, and have intercom conversations in full duplex with a passenger or other motorcycle riders. Thanks to the latest Bluetooth v3.0+EDR and the advanced digital processing technology, the Sena SMH10 bluetooth 3.0 offers the best sound quality for both incoming and outgoing sound in its class. Also, the easy-to-access and intuitive button operations make the SMH10 a perfect companion for motorcycles. Features Audio Booster Individual Volume Control Versatile Jog Dial Use while charging Upgradable firmware General Talk time 12 hours Standby time 10 days Working Distance (Intercom) up to 900 meters (980 yards) in open terrain 4-way conference intercom Dimensions Headset 84.1 mm x 56.5 mm x 38.6 mm (3.3 in x 2.2 in x 1.5 in) Clamp unit 223.8 mm x 85.5 mm x 30.6mm (8.8 in x 3.4 in x 1.2 in) Headset weight 60g (2.11 oz) Clamp unit 84g (2.96 oz) Bluetooth Profiles Headset Profile, Hand-Free Profile (HFP), Advanced Audio Distribution Profile (A2DP), Audio Video Remote Control Profile (AVRCP) Bluetooth v3.0+EDR Audio Built-in SBC Codec Voice prompts Conference phone call with intercom participant Noise cancellation Wind noise reduction Wide volume control Sample rate 48kHz (DAC) Auxiliary audio-in connection via 3.5mm jack Battery Charging time 2.5 hours Type Lithium polymer battery Please Note Some of the above features require updating the firmware to the latest v4.1. The firmware is a free download from Sena Technologies .
 
Overall rating 
5 / 5
5 / 5
Easy to install and good sound clarity.
PostedMay 9, 2012
Customer avatar
twwhitak
State:TN
Bang for the Buck 
5 / 5
5 / 5
Ease of Install 
5 / 5
5 / 5
Sound Clarity 
5 / 5
5 / 5
Ease of Use 
5 / 5
5 / 5
I purchased a pair of the Sena headsets to serve as an intercom system to be able to communicate with my wife during rides. (She has her own bike). The headsets were an easy install and it took me about 30 minutes to rig up both helmets and synch. The systems work great, the sound quality is very good. Range is a few hundred yards and battery life is good so far. I haven't tried to use the systems with phone or GPS. Instructions could be better.
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
REV'IT! Airwave Pants The perfect match for the REV'IT! Airwave jacket, these trousers are also great over-pants to wear on top of your jeans during summer commutes. The large air mesh panels allow for maximum cooling, but that's not all they're on and off in seconds, thanks to the long side zippers, which go all the way up to the hip. Reflective panels at the lower legs ensure great visibility at all times. Even more, the Knox Flexiform CE-approved armor is located in height adjustable pockets, allowing you to position the armour just the way you like it. Available in classic black or fresh silver. PROTECTION FEATURES Outer shell polyester 600D , PWRshell 500D stretch , PWRshell mesh , polyester rib Visibility laminated reflection at calf Protection fully perforated EVA foam at hips , Knox Flexiform CE protection at knees ERGONOMIC FEATURES Fit tour fit , regular Adjustability adjustment straps at waist , adjustment tab at ankles Ventilation ventilation panels at legs Features easy entrance zipper at calf , adjustable protector pockets , short connection zipper , elastic at waistband Pockets slit pockets
 
Overall rating 
5 / 5
5 / 5
Best mesh pants I've bought!
PostedApril 24, 2012
Customer avatar
twwhitak
State:TN
Bang for the Buck 
5 / 5
5 / 5
Style 
5 / 5
5 / 5
Comfort 
5 / 5
5 / 5
Air Flow 
5 / 5
5 / 5
Features 
5 / 5
5 / 5
These pants are really nice and fit very well. I wear a tall or long size and have trouble finding quality pants. Make sure that you use the Revzilla sizing guidelines for ordering. The waist sizes are really your gut size and if you have any stomach, ordering your normal jeans size will result in a size too small. I really wish that Revit would make the matching jacket in tall sizes.
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
Nexx XR1R Helmet TRI-COMPOSITE Shell (Fiberglass, Carbon and Kevlar) 3 shell sizes ECE/22-05, DOT and NBR-74712001 2 inlets and 4 outlets air-vents (Air Dinamic System) Soft anti-sweat and anti-allergic fabric inner lining Adjustable padding Removable and washable lining Anti-noise Cheek pads Chin Windstopper Double D-Ring fastening strap UV resistant shell PC Lexan shield, anti-scratch and with easy locking system Pinlock Ready Visor Ventilation System Ergo padding System - allows a perfect fit of the helmet in different head shapes. Weight 1400g (+- 50g) Note Although helmets may be pictured with a dark smoke shield, they are sold stock with a clear shield only.
 
Overall rating 
4 / 5
4 / 5
Almost a great helmet
PostedApril 25, 2011
Customer avatar
twwhitak
State:TN
Bang for the Buck 
3 / 5
3 / 5
Style 
4 / 5
4 / 5
Comfort 
4 / 5
4 / 5
Protection & Durability 
3 / 5
3 / 5
Air Flow 
3 / 5
3 / 5
Features 
4 / 5
4 / 5
I purchased this helmet because I was interested in a light helmet with good visibility and this helmet was getting good reviews. The helmet is light, comfortable, and generally well made. The one con of this helmet is that the shield has the distortion of a $100 helmet not one costing over $400. The other problem is that the cheek pads fit tight enough that it is hard to wear sunglasses and the tinted shields are sold out and not available anywhere that I can find. With the wide opening, it is uncomfortable to where this helmet in the sun. It's going to set on a shelf until I can find a tinted shield.
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
twwhitak's Review Comments
 
twwhitak has not submitted comments on any reviews.