Original equipment shield for all HJC AC-12, CL-15, CL-16, CL-SP. FS-10. CS-R1, CS-R2 FS-15, and IS-16 Helmets This shield is also recommended for Joe Rocket 101 and 201 Helmets Standard replacement shields for the HJC helmet Multiple tints for various light conditions Impact resistant
I have an HJC FS-15 Carbon helmet (L) and have always just had the stock shield. I've tried wearing sunglasses but due to how snug the helmet is in the temple region I'm limited on what I can wear. Also sunglasses don't block the sun from angles. Enter this new shield. I've looked at these before but this was on sale and I figured I'd give it a try. What a difference! I don't have to wear any sunglasses now even in full sun. Basically this shield makes it look like you're looking at everything on a cloudy day. There is light but it is not bright. The only thing I found is that I have to make extra sure the shield snaps shut or there can be a small gap when it's closed. I think this is more the design of the helmet and not the shield though but I just didn't remember this with the stock shield. Also the anti-fog works great. Even with heavy breathing it didn't fog. Haven't tried it in any weather colder than 55F though.
Tour Master Response 2.0 Boots Water-repellant leather and PU upper Preformed orthopedic vibration absorbing foot bed HiPora waterproof, breathable membrane 3M ScotchLite on rear area for night time safety VR single density compound sole for reliable grip 100 polyester round laces plus adjustable Velcro strap for easy fastening Shock absorbing latex foam flex panels Molded nylon ankle guard TecnoGI thermoplastic heel cup and toe cap Leather shift pad
I was looking for a nice pair of boots that didn't have all the logos and funny stuff that your offroad type have. I also wanted a lace up that would fit snug. These boots fit perfect and feel comfortable walking around. I normally wear a size 9.5 shoe and got the size 44 and they're just the right size. The velcro straps are nice to hold the laces from coming loose while riding. The grip on the ground is good too. I did find that the toe of the boot is thicker than my last boots and doesn't fit easily under the toe shifter on my Vulcan 1600. I've started using the heal shifter instead though so not a big deal. These are easy to get on and take off. One thing I noticed is that they do feel warm. While my feet never got sweaty, these are warmer than my last boots. I'd think this will be a welcome feature in the winter but they could have been cooler when it was 80 out. All-in-all though I love these boots and would buy again.
Gerbing's Heated Jacket Liner Constructed from a wind-resistant, soft nylon shell. Wear the heated jacket liner under other motorcycle clothing. Insulated to be thermally efficient along with being wind-resistant and highly compressible. The perfect garment to pack for those unpredictable weather conditions. Gerbings newest version includes many upgrades to help make the jacket liner even better. The most revolutionary change to the liner is the New Microwire heat panels strategically placed throughout the garment, providing you with the thinnest, lightest, strongest and fastest heating system ever. Heating pads on the chest, back, collar, and sleeves Compressible, water-repellent, durable, Thinsulate insulation Teflon coated, wind-resistant, soft nylon shell Inside and outside pockets Silky soft micro denier collar Form-fitting patterns and sizing to fit snugly and easily under your outer garments Glove plug pockets placed on the sleeves secure the plugs when not in use Dual 2 wiring configuration (for one user only) Lifetime warranty on heating elements Incorporates Gerbing's Microwire heating technology that uses micro-sized heating fibers to surround the body with warmth. SPECIFICATIONS Heat Microwire Heat Techno ogy Source 12-volts DC Current 6.4 amps Watts 77 watts Surface Temp 135F +/- 5F at 32F Please Note Gerbing's has eliminated the Power Distribution Unit found on previous versions and replaced it with individual connectors that can be stored in a zippered, internal pocket.
Bought this after I found my chest either getting cold or feeling too bulky if I put on enough layers. I've been out only once with this (it started snowing and raining for weeks after I got it) but it is very warm. Even when not turned on it is warm. Now all I have to wear is a t-shirt and my leather jacket for protection. The zip-up neck is really nice too. It stops the wind from going down your chest and provides warmth around your face. The jacket also has two large interal pockets. One thing to note is unlike the gloves by Gerbing, you do feel some wires in the jack but they are not uncomfortable.
Gerbing's Leather Clip Case for Dual / Portable Gerbing's Temp Controllers Convenient clip-on case provides for easy placement of your Gerbing's Dual Portable Temperature Controller Clips easily to a belt loop or pocket lip for easy access to your controller
I had purchased the controller prior to this case and couldn't find a good spot to store it when riding that made it easy to adjust. I tried attaching magnets and putting it on my tank but that moved too much and scratched the paint a little so not a good idea! Finally got this and it works well... little pricey for what it is (just a simple case) but it works well and the clip holds nicely.
Gerbing's G3 Heated Gloves Very comfortable glove made with an exceptionally soft and supple drum-dyed premium leather that contours to the hand. The design is sleek, stylish and very functional as a light, but strong and pliable glove. Heats the entire length of each finger, including the thumb, as well as the back of the hand FEATURES Waterproof/windproof/breathable Aquatex liner to provide protection from water and wind (though the leather exterior is not waterproof and should be treated with Nikwax Glove Proof ) Adjustable wrist enclosure Thinsulate insulation and brushed liner for added warmth and comfort Lifetime warranty on the heating elements Gel cushioned palm Incorporates Gerbing's Microwire heating technology that uses micro-sized heating fibers to surround the hand with warmth. Includes Gerbings Glove / Insole Y Harness (ACYH) SPECIFICATIONS Heat Microwire Heat Source 12-volts DC Current 2.2 amps Watts 27 watts Surface Temp 135F +/- 5F at 32F
These are not only my first heated gloves but also my first winter glove. So far these have really kept my hands warm. They are actually pretty warm even without being plugged in and fit very comfortably. I like that they do not feel bulking and fit almost a spring/fall glove. The gauntlet covers my jacket sleeves and prevents the wind from going up my jacket.
While these gloves do come with all the parts required to just hook them up and use them I would tell you to at least order the on/off switch if not the dual controller. I rode in 30 degree weather with these and just had them plugged in and they got too hot. I also found that the wire they come with is a little short to run down your back and out the sleeves of the jacket. I ultimately bought both the dual controller and jacket liner.
The only other complaint I have is that I thought there was a zippered area in the glove to store the plug when not in use but there isn't. If its too warm to use the heated part you can tuck the plug into the gauntlet but a zippered stored like on the jacket liner would be better.
Firstgear HT Overpants OUTER PANT Includes a removable, zip-out liner that is a standalone pant Overpant is sized to fit over your clothes simply buy the size you normally wear Hypertex waterproof/breathable 600 denier polyester outer shell Adjustable CE armor in the knees Padded hip protectors Articulated knee and seat for maximum riding comfort 2 front thigh air intake vents with YKK rubberized zippers to keep moisture out 2 front pass-through pocket openings for gaining access to internal pockets with hook-and-loop closure Right thigh patch pocket with YKK rubberized zipper closure for your stuff 2/3 length side zip for easy on/off protected by exterior double storm flap to keep out the elements Internal storm cuff with silicone grip and elasticized for a snug fit to keep moisture from traveling up pant leg Adjustable side waist tabs for a custom fit Heat-resistant material on inner calf 10 conjunction zipper for jacket connection 2-year limited warranty INNER PANT Standalone pant that can be worn as a destination pant Made of water-resistant taffeta 2/3 length side zip for easy on/off Adjustable waist using hook-and-loop tab Articulated knee and seat for maximum comfort Insulated from the cold with 2-ounce fiberfill Easily connect to the outer pant by a full circumference waist zipper and leg snaps
These pants fit much like a pair of snow pants you might wear if snow boarding. They have a good quality construction and the armor is nice. I've riden in 25 degree weather with these and was nice and warm the whole time with just a pair of jeans under (no thermal underwear needed). They are a little bulky looking but not too bad. They are insulated after all and that adds some bulk.
I did have a couple of issues though that I feel I should share. First, I found the knee armor a little stiff and uncomfortable when sitting. This could be that it just wasn't aligned right. However, this is removable so I just took it out. The second thing is the zippered fly on the pants. If you need to go to the bathroom there is no fly that you can unzip like on a pair of jeans. You need to pull down the pants. This is only the case if you have the insulated liner. If you're wearing just the outer cover this is not the case.
Also, while these pants are mostly easy to get into and out of I've found you seem to need somewhere to sit down and put them on or take them off. Still I can get into and out of them within a minute or two.
All-in-all I'm happy with my purchase and think these are one of the best overpants out there. Now if only the snow would melt I'd be back out riding again.
Shoei Neotec Modular Helmet Evolving on previous designs, Shoei has revamped its modular helmet style with a streamlined and attractively sculpted shape that conveys the feel of freely moving through the outdoors in the Shoei Neotec Modular Helmet. Overall shell size is kept compact by incorporating the internal sun visors open/close mechanism inside all ventilation mechanisms are shaped and positioned in such a way as to reduce any possible drag. A redesigned aerodynamic spoiler also helps to cut lift, reducing neck strain on long, cross country rides. In the Shoei Neotec all these features combine to create a premium helmet that excels in appearance, protection, comfort and performance. The Shoei Neotec Helmets chin bar is connected to the same axis point and mechanism as its shield, minimizing extra parts. This also enables simultaneous closing of the shield with the chin bar, which is then held in place with an easy-open lock release button. The shield lock system offers secure closure or the ability to keep the shield slightly open to allow for increased airflow. With the Shoei Neotec Helmet, Shoei now includes a built-in sun shield, the QSV-1. The visor tucks neatly away beneath a non-intrusive shell built into the helmets liner, and can be lowered with the easy control of a sliding button. Shoei Neotec Helmet Features Face Shield Features Easily operable lever mechanism Anti-fog, anti-scratch, 99 UV blocking New Pinlock-ready CNS-1 faceshield Wider and taller than the CX-1V that it replaces Includes Pinlock insert 3D injection molding process ensures a distortion-free view Improved Ventilation and Aerodynamics Newly designed vortex generators pull air through helmet 276 more airflow than Multitec Added inlets and outlets Vents are flush against helmet to maintain aerodynamics 5-Ply Shock-Absorbing Fiber Shell 3 shell sizes AIM Multi-Composite construction Lightweight yet strong Shell-integrated spoiler reduces lift and drag during high-speed riding Dual EPS Liner Multi-density EPS for optimal protection Two vents funnel fresh air through the EPS liner Dual liner channels route and disperse air evenly throughout the helmet EPS liner in chin bar All new interior Fully removable 3D interior liner Top center pad is removable and washable Improved cheekpad design allows better fit with eyeglasses Included chin curtain can be inserted into the chin bar to reduce turbulence and noise All Neotec Helmets sold in the US have a double D-ring closure Be sure to check out our Shoei Neotec Review above, in which we detail and break down all of the features and functionality of the brand new Shoei Neotec Helmet. Note Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States