Ekim
 
 
 
Ekim's stats
 
  • Review count
    5
  • Helpfulness votes
    2
  • First review
    December 17, 2012
  • Last review
    April 22, 2013
  • Featured reviews
    0
  • Average rating
    4.4
 
Reviews comments
  • Review comment count
    0
  • Helpfulness votes
    0
  • First review comment
    None
  • Last review comment
    None
  • Featured review comments
    0
 
 
Ekim's Reviews
 
RAM Mounts Aqua Box RAM-HOL-AQ2, RAM-HOL-AQ3 and RAM-HOL-AQ6 cases provide sealed enclosure and protection for your handheld devices. The clear, touch through screen allows you to view your electronics as well as use their function keys while in place. There is even a place for a small lock to serve as a theft deterrent. The AMPS hole pattern on the back of the box allows this enclosure to be attached to a multitude of RAM mounting bases and kits (adapter sold separately). Ideally suited for Motorcycles to keep your portable devices safe, dry, and accessible. Features A unique, patented all inclusive seal and Flex-Lens Touch through lens to operate buttons Power, earphone and accessory cables are routed through a patented, self draining baffledesign to keep moisture out Fits any RAM Mounting System Easily locks with any standard mini padlock All marine grade construction including stainless steel hinge pin and mounting hardware Flex-Lens may be replaced in seconds if scratched or damaged Lifetime Warranty on all components other than Flex-Lens AQUA BOX Small Internal Dimensions Width2.38, Height4.63, Depth1.13 inches AQUA BOX Small External Dimensions Width3.5, Height5.25, Depth1.5 inches AQUA BOX Medium Internal Dimensions Width2.88, Height5.75, Depth1.188 inches AQUA BOX Medium External Dimensions Width4, Height6.5, Depth2 inches AQUA BOX Wide Internal Dimensions Width6, Height4, Depth1.75 inches AQUA BOX Wide External Dimensions Width6.5, Height5.25, Depth2 inches Material High Strength Composite Installation Instructions The face of the AQUA BOX is a door, allowing you to place your electronic device in the cradle. If required, you can lock the box, with a small padlock, once closed. Inside the RAM AQUA BOX are padded sheets enabling you to place your electronic device in the box firmly and securely. You can punch out the back of the AQUA BOX to allow cables you be connected to you device, while maintaining a waterproof environment.
 
Overall rating 
4 / 5
4 / 5
Great case
PostedApril 22, 2013
Customer avatar
Ekim
State:NC
Bang for the Buck 
4 / 5
4 / 5
This is a high quality waterproof case. It provides various mounting options and comes with plenty of padding to fit a wide range of devices. Only one problem encountered. I use my iPhone for navigation which can cause it to heat up. While the phone was in the case charging and running Nav., it would sometimes overheat and shutdown. I would have to remove the phone and let it cool off before using it again. This is not a design flaw of the case, just my set up and seemed to happen when in direct sunlight (no problems on shaded back roads).
Rides: 2009 Yamaha FZS1000 FZ1
Yes, I recommend this product.
+1point
1of 1voted this as helpful.
 
RAM Mounts Fork Stem With Diamond Base and Double Socket Arm Kit The RAM-B-176 consists of a fork stem motorcycle base, double socket arm and diamond base adapter. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1 diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm allowing for almost infinite adjustments and perfect viewing angles. The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or 0.5 1.10 at the following intervals Metric Standard 12mm 0.50 14mm 0.55 16mm 0.63 18mm 0.71 20mm 0.79 28mm 1.10 Material Powder Coated Marine Grade Aluminum Ball Size 1 Rubber Ball B Size
 
Overall rating 
5 / 5
5 / 5
High quality mount, just what you'd expect from RAM
PostedApril 22, 2013
Customer avatar
Ekim
State:NC
Bang for the Buck 
4 / 5
4 / 5
This is another great mount from RAM. It provides a very clean install. The instructions were clear and the kit included all necessary hardware making installation a breeze (we installed it in a parking lot with a multi tool). I have no problem recommending this mount.
Rides: 2009 Yamaha FZS1000 FZ1
Yes, I recommend this product.
+1point
1of 1voted this as helpful.
 
Firstgear Heated Carbon Gloves Features DC-heated, produces 15 watts of heatat 12.8 Volts (each glove) and should be used with a Firstgear Heat-Troller for optimum safety Y-Harness is required for use with Firstgear Heat-troller (unless you have a Firstgear heated liner, then this is unnecessary) Grade-A, top-grain, drum-dyed cowhide construction Porelle breathable, waterproof membrane Thinsulate layer Pre-curved fingers and finger-mounted,rubber, faceshield wiper Elastic wrist and adjustable hook-and-loop gauntlet closure Reinforced protection in palm Reflective piping on top Make sure to check out our Firstgear Heated Gear Buyers Guide
 
Overall rating 
4 / 5
4 / 5
Work great, but a bit bulky
PostedDecember 17, 2012
Customer avatar
Ekim
Bang for the Buck 
5 / 5
5 / 5
Style 
5 / 5
5 / 5
Comfort 
4 / 5
4 / 5
Protection & Durability 
4 / 5
4 / 5
Fit
Small
Slightly Large
Large
As far a heating goes, they work great. The heating elements are on the top of the hand only, but I dont find I need for anymore than that (at least at just above freezing). They are a bit bulky though. I purchased an XL by following the sizing chart. When putting the glove on, the inner liner fits properly but there is still quite a bit of leather outter glove that extends beyond the inner liner. This makes it very difficult to handle smaller things such as connecting the plugs for the gear and operating the knobs on my heat troller. It is almost like they have a one size outter leather glove that they just sew different sized liners into. I say follow the size chart. If you are in between, try the smaller size first.
Rides: 2009 Yamaha FZS1000 FZ1
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
Firstgear Dual Portable Heat Troller Features Designed for 1 person to variably control heat separately to multiple garments such as a jacket liner and gloves Balances heat between any set of heated garments, such as jacket liner on 1 control and gloves, pants and socks on the other Each rider must have their own Heat-Troller Portability allows you to use it with more than one 12-volt DC motorcycle or ATV Make sure to check out our Firstgear Heated Gear Buyers Guide
 
Overall rating 
4 / 5
4 / 5
It works
PostedDecember 17, 2012
Customer avatar
Ekim
Bang for the Buck 
5 / 5
5 / 5
It took me a little bit to figure out where to mount the unit. I finally decided to just keep it in my jacket pocket, that way I only have one connection to make to the bike when mounting/dismounting. The knobs are a bit tough to grasp with a winter gloved hand (too small). Otherwise, it is very well made and works as designed.
Rides: 2009 Yamaha FZS1000 FZ1
0points
0of 0voted this as helpful.
 
Firstgear's no one left behind policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider, the 65-watt units minimizes the draw on the bike's charging system. Efficient warming is dependent upon close proximity to the body. Firstgear reduced the amount of sizes while ensuring a good fit by incorporating stretch panels into the liner's design. The long-sleeve liner cocoons its wearer in warmth by incorporating heating elements across the upper and lower back, down the sleeves, around the neck and, to combat the effects of windchill, the liner concentrates heat in the front of the jacket.3 Make sure to check out our Firstgear Heated Gear Buyers Guide
 
Overall rating 
5 / 5
5 / 5
Winter Riding Must Have
PostedDecember 17, 2012
Customer avatar
Ekim
Bang for the Buck 
5 / 5
5 / 5
Style 
4 / 5
4 / 5
Comfort 
4 / 5
4 / 5
Protection & Durability 
5 / 5
5 / 5
This liner works great. The heating elements are placed nicely throughout the liner leaving no cold spots. I have ridden in temps. at just above freezing and stayed nice and toasty. Sizing is spot on. Pay attention to the waist size, there are no strech panels or elastic at the bottom of the liner and mine is a bit snug at my waist.
Rides: 2009 Yamaha FZS1000 FZ1
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
Ekim's Review Comments
 
Ekim has not submitted comments on any reviews.