Shoei RF-1200 Helmet The pinnacle of perfection, the Shoei RF-1200 Helmet represents the culmination of 56 years of helmet heritage and was designed from its inception to be an industry leader in comfort, performance and protection. The wind tunnel-tested shell is optimized to provide a compact and aerodynamic shape, reducing wind-noise, buffeting and weight. Shoei not only designed the RF-1200 to be one of the most comfortable helmets on the market, but also one of the safest, meeting both DOT and SNELL M2015 safety standards. Whether you are a track day enthusiast or cross-country cruiser, the RF-1200 will allow you to ride with confidence, freeing you to concentrate on the road and, most importantly, enjoy the ride. Slim And Light Weight Design One of the most important features of a quality helmet is that you hardly know its there protecting your head. Shoei has reduced the weight of the RF-1200 by using a slimmer design and building a distinct line into the side of the helmet that also serves as an accent. As a result, the new Shoei RF-1200 is lighter than any other Snell certified helmet in the current Shoei lineup. Shell Construction The slim design of the Shoei RF-1200 , with its distinct accent cut line, widens the bottom of the helmet to help ease the process of putting the RF-1200 on or taking it off. Further advancing the comfort of the AIM+ shell is the industry leading four shell sizes that the Shoei RF-1200 comes in. The impact-absorbing dual liner consists of two layers incorporating different densities, helping to effectively balance the potential impact applied to the more rigid shell. Quietness Through advancements in the aerodynamic shape, improved interior linings and a new and improved shield system the rider will experience a very quiet and comfortable riding experience. The interior of the RF-1200 has achieved a balance of a comfortably soft fit and a firm, stable hold. The design of the cheek pads also improves the motion of the neck, thus helping the rider to check traffic behind him/her for example. Shield System The CWR-1 Pinlock shield features ribs on top and bottom of the shield to improve rigidity and eliminate bending of the shield caused by wind pressure or the opening and closing of the shield. Independent beading in the top and sides of the Shoei RF-1200 help to keep the seal of the shield tight and eliminate any excess air. In addition to the CWR-1 shield, Shoei has developed a new base plate for the RF-1200. The Quick-Release Self-Adjusting base plate is spring-loaded and pulls the shield back onto the helmet, sealing it tightly against wind and rain. The addition of a five-stage rotating dial allows for fine tuning of the base place for easy shield adjustments. Ventilation A large lower three position vent, three upper air vent intakes and four uniquely positioned upper exhaust outlet vents combine with the Dual Density EPS liner to allow cooling air to travel unrestricted through tunnels created in the EPS liner. Features: Four shell sizes Dual density EPS liner Superior ventilation 3D Max-Dry System II Liner E.Q.R.S. (Emergency Quick-Release System) CWR-1 Shield System Neatly secure chin strap Includes Pinlock pins and lens insert Includes breath guard and chin curtain Snell M2015 and DOT Certified Note: Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States.