Icon Field Armor Stryker Vest The Field Armor Stryker vest is at the very heart of the Icon creed. A silhouette that broke with the conventional race derivative dogma and struck out on its own street specific course. Low profile back armor with high profile design. Back protection for tactical riding. The original Field Armor vest set a benchmark in the back protector world - the Stryker ups the ante. The back protector is loaded with d3o intelligent foam and full CE approval, the Field Armor Stryker Vest back armor is designed to take hits you hope will never come. Rock it under your jacket or over a hoody - just wear it. If today is the day that you go down, you want Stryker on your back. Features CE APPROVED STRYKER BACK ARMOR D3O BREATHABLE BACK INSERT, WITH CUSTOM MOLDED ICON GEOMETRY ARTICULATING INJECTION MOLDED HARD BACK ARMOR WITH AIR FLOW CHANNELS INJECTION MOLDED CHEST PLATE WITH INTEGRATED AIR INTAKES VENTED BIOFOAM AND AIRMESH CHASSIS HYDRADRYTM MOISTURE WICKING LINER HIGHLY ADJUSTABLE WAIST AND SHOULDER STRAPS LOW-PROFILE DESIGN FITS UNDER MOST JACKETS
I bought this to wear when I don't wear a riding jacket. The back protector seems decent. One issue I have is with the plastic pins on the back armor. They are easily popped out. Luckily this happened in my garage and I was able to push them back in. On a hot day, your back will be drenched with sweat. I get a few weird looks with it, but I really don't care. I've worn it about a dozen times last summer anywhere from temps 80-105. The fit seems true to size, I bought the 2XL-3XL I have a 48 inch chest size.
SIDI Traffic Rain Boots A mid height boot Lorica outer construction Membrane equipped to add a waterproof yet slightly breathable barrier between the elements and the riders feet Full length inner gaiter Perforated Teflon treated nylon lining Composite inner sole Removable arch support Internal heel protection Internal ankle protection Internal toe protection Zipper and Velcro closure system Non-slip lug sole Lorica toe shift pad Double stitched in all high stress areas
Normally I wear a 11 EEEE, I have a real problem with finding boots. I first ordered a size 45, because I was told they were a bit big. Not for my fat feet!! I returned them and ordered a size 46, and they are okay. These boots are still tight on my wide foot, but not terribly uncomfortable. They seem to be HOT! There really isn't much breathe ability in these boots. I rode in some rain today, and my feet stayed dry. I like these boots, but I think I will be ordering some better vented boots soon.
The dark smoke is great on my Bell Air Raid helmet. It looks good and is extremly dark. I normally wear sunglasses all the time (I am very light sensitive) and I do not need them with the helmet. I rode home today just after dusk, and it was really dark under the shield, but not the end of the world.
Bell Arrow Air Raid Helmet Theres no doubt that price is a big concern for many people these days and the new Bell Arrow is proof that protection need not come with a big price tag. Featuring a lightweight polycarbonate alloy shell, adjustable flow-through ventilation and an anti-scratch coated flip down shield, the Arrow is straight up a good helmet at a great price. Features Lightweight composite polycarbonate alloy shell Tool-less, no-hassle flip-down shield Anti-scratch and UV protected shield Adjustable flow-through ventilation system for cooling and comfort Adjustable chin vent to aid in cooling and shield defogging Removable and washable, antibacterial/antimicrobial interior comfort liner Aerodynamic design for exceptional stability and low wind noise Padded chin strap with D-ring closure and strap keeper Five-year warranty Certification DOT Sizes XS, S, M, L, XL, XXL Weight 1550g Note Helmet shown with optional tinted shield. Clear shield included. SIZING NOTE In our experience Bell Arrow Helmets tend to run 1-2 sizes larger then helmets in other brands, we recommend ordering at least one size smaller then you might typically take
The break in time on this helmet felt like about 2 hours. My head is between round to narrow, normally I wear a Large, and in this helmet I wear a Medium. It fits perfect! I received this helmet this week and got to test it our today in 40 degree weather. The first thing that I noticed is the helmet looks larger that what I am used to. However, it doesn't feel heavy. I had a lot of wind coming up thru the bottom of the helmet. It is in definate need of a chin cover in cold weather. That would be the one thing that Bell could add to help with this helmet. There was a fair amount of noise from the wind, but I ride in earplugs, and plan to add a SENA Bluetooth, so that shouldn't be an issue. Vision is great and I added the dark smoke shield to the the Air Raid and it looks great. The dark smoke is not the best for night riding though. Thanks RevZilla for a great value priced helmet.
Shoei GT Air Helmet - Solid Colors SHOEI introduces the GT-Air, a lightweight full-face helmet with improved ventilation, a fully removable noise-reducing interior, a built-in sun visor and a distinctively stylish shell that is as good looking as it is integral to its performance while on the road. Aerodynamic Shell Design Aerodynamic properties are maximized through extensive wind tunnel and professional riders feedback Multi-Piece EPS liner enhances impact absorption and ventilation Three shell and four EPS liner sizes provide increased fit options that help to comfortably fit most head sizes Molded air spoiler reduces drag and lift, as well as diminishes pressure on the riders neck while riding at speed Sun Shield Visor System Built-in QSV-1 sun shield gives riders instant relief from sun glare in one quick motion Visor meets ANSI Z80.3-2010 standard for non-prescription eyeglasses Large and easy to reach switch activates the 3D injection-molded inner sun shield Distortion-free shield blocks 99 of harmful UV rays Forehead area of the outer shell is raised slightly to accommodate the internal sun shield, helping allow for the integrity of the helmets inner EPS liner to remain intact Ventilation System Upper Air Intake Vent is positioned to maximize air volume into the helmet interior Large upper intake vent positioned to maximize performance behind wind screens Easy to operate large lower intake vent Lower air intake/defroster vent reduces shield fogging and increases ventilation The rear/neck vents allow for effective air exhaust Breath guard and chin curtain included Advanced Integrated Matrix (AIM) High performance fiber materials are combined with elastic organic fibers to create a shell structure that is ultra-lightweight, rigid and resilient Interior System 3-D Max-Dry center pad and multi-layered, polyurethane foam cheek pads Chin curtain prevents wind entry and reduces noise Cheek pads are replaceable or removable for maintenance Eyeglass compatible interior E.Q.R.S. (Emergency Quick-Release System) allows emergency medical personnel to easily remove the cheek pads from the helmet of a rider involved in an accident, in turn making the helmet more easily removable Standard Chin-Strap Clip Neatly secures chin strap CNS-1 Shield System The CNS-1, three-dimensionally curved shield is both wider and taller than the CX-1V it replaces Includes new redesigned Pinlock Anti-Fog Lens for more coverage of the CNS-1 shield Dual-Ridge window bead increases contact with the shield to reduce wind noise Scratch-resistant shield coating 99.9 protection from harmful UV AB rays Safety Certification DOT-218 Note Due to manufacturer restrictions, Shoei products can only be shipped to addresses within the United States
Ready for N-COM communication system 6-in-1 crossover helmet design with quick-change accessories allows for customized look and fuctions for every ride Includes clear shield, integrated sun shield, peak and removable chinbar GE Lexan chinbar is EPS lined mounted with strong stainless-steel latches, it passes the tests for full face helmets of the European standard ECE-2205 Removable and washable liner is antibacterial, antifungal, and wicking Quick-change shield is optically correct and fitted in an exceptionally large eyeport. It accepts the Pinlock antifog insert (sold separately) Microlock (adjustable quick-release) retention chinstrap system (Microlock chinstrap helmet lock extension available (sold separately)) Top vent with rear exhaust grid, and shield vent DOT approved Helmet Weight 3 lbs. 7-3/4 oz. (1579g) ( View Motorcycle Helmet Weights ) Read more about the Nolan N-COM Bluetooth Communication System
The S-MX 5 Waterproof boot has been created as a performance road and track boot, with built-in weather protection. Incorporating the latest technical footwear design and material know-how, the S-MX 5 WP is notable for its comfort, hugging fit, safety performance and wet weather performance. Features Alpinestars exclusive waterproof and breathable membrane liner ensures 100 weather protection, with an integrated gusset over entry aperture to prevent water penetration down the leg. Durable, high-tech micro-fiber upper construction offering a high level of flexibility Double injected PU shields the shin, ankle, calf, toe and heel from impact while minimizing abrasion Inner protection is given by a double injected panel connected to the heel counter, hidden beneath the outer shell and running up the outer ankle Quick drying polyamide lining is laminated with open cell foam and high density contoured padding to absorb shocks to the foot area The S-MX 5 boot is CE certified Innovative air vents at the ankle, heel and forefoot are covered with a specially designed mesh to provide unmatched levels of rider comfort Large throat profile instep and Achilles flex bellows for superior flex and comfort MTP mesh liner and anatomical, removable, PU Foam foot bed keeps the foot cool and comfortable A fully vented version is also available in Black Innovative inner (medial) side entry opening/closure system that features an elastic mounted zipper with an extra wide Velcro flap, to give a precise, comfortable fit and wide opening aperture for ease of access Highly ergonomic, lasting for ultra precise fit Exclusive compound rubber sole features structured shank reinforcement for added support to the arch area Interchangeable bi-injected PU toe slider with snap-in assembly