Thunderpig
 
 
 
Thunderpig's stats
 
  • Review count
    2
  • Helpfulness votes
    0
  • First review
    November 14, 2011
  • Last review
    July 23, 2013
  • Featured reviews
    0
  • Average rating
    3.5
 
Reviews comments
  • Review comment count
    0
  • Helpfulness votes
    0
  • First review comment
    None
  • Last review comment
    None
  • Featured review comments
    0
 
 
Thunderpig's Reviews
 
AltRider Yamaha Super Tenere XT1200Z Side Stand Foot Install theAltRider Side Stand Foot for the Yamaha Super Tenere to keep it from sinking or falling on soft surfaces. Made from 1/8 inch stainless steel, this foot features 3D tread to create traction for your boots. The tread means you can easily deploy the side stand while still on the bike. After months of use, the AltRider side stand foot will remain tight because it clamps down on the actual foot of the side stand with Torx fasteners. No more rattling or stripped fasteners. Specifications Made from 1/8 inch stainless steel Torx fasteners (requires T-25 Torx driver) Height 1 inch Width 4 inches Depth 4 inches Weight 0.5 lbs
 
Overall rating 
2 / 5
2 / 5
Nice Product, Poor Fit
PostedJuly 23, 2013
Customer avatar
Thunderpig
From Denver
State:CO
Rider Type:Adventurer
Age:45-54
Gender:male
Bang for the Buck 
4 / 5
4 / 5
Ease of Install 
1 / 5
1 / 5
Finish 
5 / 5
5 / 5
Durability 
4 / 5
4 / 5
I had the same problem with fit but didn't want to modify it if not necessary. I contacted AltRider and they know that this item does not fit all stock Tenere kickstands. They said they are probably going to redesign it in a few months so that it fits without needing to modify it. So I'm returning it to wait out a corrected version.
0points
0of 0voted this as helpful.
 
AltRider Luggage Rack Yamaha XT1200Z Super Tenere The AltRider Luggage Rack for the Yamaha Super Tenere XT1200Z is greatly improved over the stock version, making it one of the first parts youll want to install on your new adventure bike. Designed to be strong for on or off road riding adventures, it is made from 3/16 inch (4.75 mm) aluminum and features side flanges for added rigidity and mounting points, as well as a completely redesigned bracket. This design also allows the luggage rack to be run in the low position (with out pillion seat or grab handles). It uses the same hardware, so there is nothing to lose. The AltRider Luggage Rack comes with a mounting bracket, made from 3/16 inch (4.75 mm) aluminum, which replaces the stock plastic mounting bracket and greatly increases the racks capacity. Between the bracket and rack, AltRider created a cubby that is 8.5 X 6 X 3. The cut-out pattern is perfect for creating a door with a bungee cord or ROK straps, making it a perfect glove box to stuff items in without the need to secure them. The rack itself is uniquely designed with a variety of cut-outs, so you can easily attach your bags with anything from straps to bungee cords to tie downs. The AltRider Pillion Rack is simple to install simply remove the stock pillion seat, and use the supplied bolts to attach the rack. All hardware is entirely recessed creating a completely flat luggage mounting surface. The AltRider Luggage System is the most versatile option on the market allowing a multitude of configurations based on your capacity needs. The Rear Luggage Rack can be mounted in an upper or lower position (lower position requires removal of stock grab handles). Use the Rear Luggage Rack in the lower position with the Pillion Rack to create over 2.5 square feet of completely flat mounting surface. All hardware is fully recessed, and every edge is laser cut and CNC-routered to ensure a smooth corner. If you want the option of using a top case, the AltRider Luggage Rack provides an interface for the Givi Monokey systems , allowing attachment with a mount kit (sold separately). The strong and versatile AltRider Luggage Rack for the Yamaha Super Tenere XT1200Z is a smart solution for packing up for your next ride, and can be used in either the standard or low position. Specifications Made from 3/16 inch (4.75 mm) anodized aluminum All stainless steel hardware Only compatible with the Givi Monokey top case system Luggage Rack System Dimensions Width 14 (36.3 cm) Length (combined) 26.9 (68.3 cm) Weight (combined) 5.9 lbs (2.7 kg) Rear Luggage Rack Dimensions Height 3 inches Width 14 inches Depth 14 inches Weight 3 lbs Pillion Rack Dimensions Length 12.9 (32.8 cm) Width 14.3 (36.3 cm) Weight 2.9 lbs (1.3 kg) Note Some images show the AltRider Givi Monokey Luggage Rack Kit , sold separately. Images show a laser-cut AltRider logo but product will feature a stamped logo.
 
Overall rating 
5 / 5
5 / 5
Excellent Rack for the S10
PostedNovember 14, 2011
Customer avatar
Thunderpig
From Denver
State:CO
Rider Type:Adventurer
Age:45-54
Gender:male
Bang for the Buck 
4 / 5
4 / 5
Ease of Install 
4 / 5
4 / 5
Performance 
4 / 5
4 / 5
Finish 
5 / 5
5 / 5
Durability 
5 / 5
5 / 5
After the stock rack cracked from the strain of a tail bag strapped to it, I bought the Alt Rider version. Delivery was very fast. The quality of the rack is amazing, it uses a very heavy gauge aluminum that will probably outlast the bike.
Yes, I recommend this product.
0points
0of 0voted this as helpful.
 
Thunderpig's Review Comments
 
Thunderpig has not submitted comments on any reviews.